19 research outputs found

    Sip Based Mobile Voice Over Ip Client For Wireess Networks

    Get PDF
    Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2008Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2008Bu tez SIP tabanlı mobile bir VoIP istemcisinin tasarımını ve gerçeklenmesini tanımlar. Bu tez temelde çoktürel ağlar üzerinde çalışabilen bir VoIP istemcisi tasarımının çözülmesi gereken iki sorununun üzerinde yogunlaşır. Birinci ve en zorlu sorun farklı erişim teknolojileri arasında kullanıcıya fark ettirmeden yer değişim desteği sağlanmasıdır. Bu tezde, kullanıcıya fark ettirmeden el değiştirme yönetimi, uygulama katmanında, multimedya oturumunu başlatmak, sonlandırmak ve değiştirmek için kullanılan Oturum Başlatma Protokolü (SIP) kullanılarak ele alınmıştır. SIP yaygın bir şekilde kabul edilmekte olan bir VoIP standartıdır. Kullanıcıya fark ettirmeden el değiştirmeyi destekleyebilmek için, VoIP istemcisi üzerinde çalışan SIP tabanlı bir bağlantı yöneticisi önerilmiştir. Bağlantı yöneticisi yeni ağlar keşfettiğinde, adaylar listesinden bir ağ seçer ve hali hazırda yürütülmekte olan iletişimi kullanıcıya fark ettirmeden yeni ağ arayüzüne aktarır. Dolayısı ile, bu birim Wi-Fi, 3G gibi çoktürel ağlar arasında dolaşmayı sağlar. İkinci sorun ise, en kaliteli çağrı (arama) desteğini sağlamaktır. En kaliteli çağrı desteği, iletişim kurmak isteyen tarafların farklı türden ağlara bağlı olmaları durumunda, VoIP uygulamasının iletişim tipine (yarı-çift yönlü yada tam-çift yönlü) karar vermebilmesi demektir. Örneğin, eğer iletişim kurmak isteyen taraflardan biri bir GSM ağındaysa, en iyi çağrı kalitesini yakalayabilmek için, iletişim yarı-çift yönlü olarak kurulmalıdır. Bu tez, bahsedilen özelliği desteklemek için, istemci tabanlı bir karar mekanizması önerir. Bu karar mekanizması, iletişim kurulmak istenen tarafa, istemcinin içinde bulunduğu ağa göre belirlenmiş iletişim tipini içeren bir davet iletisi gönderir. Diğer istemci bu davet iletisini aldıktan sonra, aynı karar mekanizması, iletişimi “bas-konuş VoIP” yada “tam-çift yönlü VoIP” olarak ayarlar.This thesis describes the design and the implementation of a SIP-based mobile VoIP client. It mainly focuses on two challenges of designing a VoIP client which works on heterogeneous network environments. One and the most challenging problem is the provision of seamless mobility support among different access technologies. In this thesis, seamless handover management is handled at the application layer by using Session initiation protocol (SIP), which is used to initiate, terminate, and modify multimedia session. SIP is becoming a widely accepted standard for VoIP. To support seamless handover, a SIP based connection manager is proposed on VoIP client application. As new networks are discovered by the connection manager, it selects a new network from the candidate list and transfers the current communication to the new network interface seamlessly. Therefore, this module provides roaming across heterogeneous networks such as Wi-Fi, 3G. Second problem is providing the best effort call quality support. It means that if the communication parties are in dissimilar networks, the VoIP application should decide the communication type (half-duplex or full-duplex). For instance, if one of the communication parties is in a GSM network, then the communication should be established as a half-duplex manner to achieve best call quality. This thesis proposes a client-based decision mechanism to support this property. This decision mechanism sends an invite message including the communication type (half-duplex or full-duplex) of the client according to the network in which it operates to the other communication party. After the other client receives this invite message, same decision mechanism adjusts the communication as either a “push to talk VoIP” or a “full-duplex VoIP”.Yüksek LisansM.Sc

    Demo abstract: TeleHealth - Intelligent healthcare with M2M communication module

    No full text
    Chronic diseases, such as diabetes, heart disease (e.g. arrhythmia and hypertension), chronic respiratory diseases (e.g. asthma and COPD), are by far the leading cause of mortality in the world, representing 63% of all deaths. Out of the 36 million people who died from chronic disease in 2008, nine million were under 60. Remote patient monitoring is an efficient and cost-effective solution to mitigate this problem. The key technology to facilitate wireless mobile healthcare or TeleHealth is cellular based M2M (machine-to-machine) communication. In this demo, we present a M2M Communication Module and its healthcare application developed at Turkcell Technology, Applied Research Lab.Publisher's Versio

    Neotectonics of the Western Suleiman Fold Belt, Pakistan: Evidence for Bookshelf Faulting

    No full text
    The Suleiman Fold-Thrust Belt represents an active deformational front at the western margin of the Indian plate and has been a locus of major earthquakes. This study focuses on the western part of the Suleiman Fold-Thrust Belt that comprises two parallel NW–SE oriented faults: Harnai Fault and Karahi Fault. These faults have known thrust components; however, there remains uncertainty about the lateral component of motion. This work presents the new observation of surface deformation using the Small Baseline Subset (SBAS), Interferometric Synthetic Aperture Radar (InSAR) technique on Sentinel-1A datasets to decompose displacement into the vertical and horizontal components employing ascending and descending track geometries. The subsurface structural geometry of this area was assessed using 2D seismic and well data. In addition, geomorphic indices were calculated to assess the relative tectonic activity of the area. InSAR results show that the Karahi Fault has a ~15 mm right-lateral movement for descending and ~10 mm/for ascending path geometries. The Harnai Fault does not show any lateral movement. Seismic data are in agreement with the InSAR results suggesting that the Harnai Fault is a blind thrust. This work indicates that the block between these two faults displays a clockwise rotation that creates the “bookshelf model”
    corecore